SP Connection Elements

SP Connection Elements

All standard types of gratings and connection elements for all the sub-structures are possible. Kirac Galvaniz fasteners are used especially in be walked areas, gratings are designed to. Gratings used in areas to be exposed to vehicular traffic, the carrier optionally between blades can be supplied with welded perforated metal plates. BGI 588 specialist professional associations according to the instructions, “the danger of falling in areas with Gratings, at least connected to the four corners.”

Related to gratings connection as an “Arbeitsstatten-Verordnung § 12, to prevent the fall of objects thrown down” and instructed Hio “Gratings for industrial use,” page 5, paragraph 5.2: “Grates, the removal and must be prevented from slipping. A grating connected to the bottom of each carrier, at least at four points.” taken as reference. B334K, B351, B433T, B633K B533K and fittings, the connection is even greater relaxation of the grid prevents the carrier from slipping. All fittings should be checked for maintenance and activities on a regular basis. Control intervals, varies depending on operating conditions. Connection elements use and method of the user's responsibility. Therefore, beyond the scope of statutory warranty for all fasteners. Pore openings is determined by the reference numbers of fasteners and ranged from 20 to 66mm. Numbers last two digits of a connecting element reference, refers to the lightness of pores.

For example: the standard connector element
Span = 33.33 mm pore Bi33K
Span = 22.22 mm pore Bi22K

Standard Connector

B & B133 T 133 K
-the upper part or plate-clamp
-sub-parts
-bolts, nuts, grommet

This connector element is also available in stainless steel with the order code 132K. Nuts length should be at least 30mm plus the height of the grid. This type connector element can be connected from the top and 33 mm, and more suitable for the carrier mean pore openings.